|
Particulars
|
BHI RM800
|
BHI RM 1050
|
|
Main Material
|
IS 2062 B GRADE MS
|
|
|
Hopper Capacity
|
800 Liters
|
1050 Lites
|
|
Batch Capacity
|
600 Liters
|
750 Liters
|
|
Machine Out Put / Hour
|
10-12 CuM
|
12-15 CuM
|
|
Prime Mover
|
12.5 hp 3 Phase
|
15 Hp 3 Phase
|
|
Jack Leveling
|
4 Nos. Pin Type Jack
|
|
Water Tank Capacity
|
200 Liters
|
250 Liters
|
|
Water Pump
|
1 hp self priming Mono set Pumps (2 Nos)
|
|
Water Charge and Discharge System
|
Sensor Based Water Discharge System for Higher Accuracy
|
|
Weighing System
|
Digital Load Cell Based Weighing System for Higher Accuracy
|
|
Load Cell
|
3 Nos. of Load Cell Adi Artech Make
|
|
Pipe fitting and overflow Gauge for Water Tank
|
ISI Marked Fittingd for Higher Durability
|
|
Hydrulic System
|
Hydraulic Pump Dowty Make Hydraulic Cylinder Heavy Single Acting Hydraulic Cylinder with 615 mm Stoke
|
|
Gear Ring and Roller
|
Accurately Machined with Gear Cutting operation Supported by Heay Duty Tiwn Rollars
|
|
Ring and Twin Rollar Material
|
Ring CI Casting and Rollers are EN-8 Grade Casting
|
|
Tyers
|
Pneumetic Tyres 4 Nos. Ceat or MRF Tyres For Long Life
|
|
Lifiting System
|
4 Nos. of Lifting Hooks are Provided to lift the Machine for the purpoe of loading and unloading
|
|
Mixing Blades
|
6 Nos. of Mixing Blades 5 mm Thick for Better Mixing
|
|
Mixing and Discharge of Concrete
|
Forword Rotation of the Mixer Mix and Reverse Rotation of the Mixing Drum Discharge the Concrete
|
|
Three Bin System
|
Three Separate Bins are Provided to Weigh Thrree Different ingredients and each Bin Has Indivisual Load Cell to Weigh the Material
|
|
Manual Operating System
|
Handle Provision is Given at the Shaft end of Main Motor to Dischrge the Concrete From the Drum in case of the power Failure
|
|
Vibrating System
|
1 hp Vibrating Motor Provieded under Hooper
|
|
Batch Sie in Kgs
|
1400
|
1800
|
|
Hyduralic Pump Out
|
20 @ 207 Bar
|
23 @ 300 Bar
|
|
No. of Hydraulic Cylinder
|
1
|
1
|
|
Towing speed and System
|
Tow Bar is Provided for Towing and Speed is 20 Km/ Hour
|
|
|
Drum Feeding System
|
Mechanical /over Flow
|
|
|
Voltage Supply
|
3 Phase , 415 Volts, 50 Hz
|
|
Control Panel
|
Microprossesor Based Control Panel
|
|
Buzzing System
|
Inbuilt buzzing Sysetm and Light Blink Facility for Uneducated Labour
|
|
Weight of the Machine
|
2700 Kgs
|
3500 Kgs (Aprox.)
|
|
Hydraulic Oil Tank
|
40 Liter Capacity
|
90 Liter Capacity
|
|
Hydraulic Oil Grade
|
68 Grade Hydro. Oil
|
68 Grade Hydro. Oil
|
|
Tool Box
|
Yes
|
Yes
|
|
Total Connected Power
|
15.5 hp
|
18 hp
|
|
Lubrication System
|
Optional Accessories
|
|
Printing Facility
|
Lubrication Pump in Built for Lubrication Rollers and other Partsof the Machines
|
|
Feeding System
|
Automatic Feeder can be attached with this Machine to make it fully Automatic
|
|
Five Twin Roller System with Chain Spoket System
|
Five Twin Roller System with Double Shaft Chain Spocket System
|
